Sale!

Original Raspberry Pi 4 Model B 1/2/4GB RAM Kit

(15 customer reviews)

$85.49$152.55

Clear
SKU: 4000066043319 Categories: , ,

Original Raspberry Pi 4 Model B 1/2/4GB RAM + Case + Fan + Heat Sink + Power Adapter + 32/64 GB SD Card + HDMI Cable for RPI 4B

Introduction :

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation
Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption.
For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.
This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, up to 4GB of RAM, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification

Case :

1. Acrylic material , won’t block the Wifi and Bluetooth signal. And it is clearly tansparent , you can watch the Raspberry Pi through the case all the time.
2. Made by 6 acrylic sheets , easy to install together ( Please be gently when installing)
3. There is a layer of protective film on the surface of acrylic , please tear up it before use , then it will be transparent.
4. It is a dual use case. You can use the case with fan one the cover , or you can use the case with GPIO type 3.5 inch LCD ( can not install fan at the same time) . The fan can provide well heat dissipation.

Power Adapter :

1. USBC type interface for Raspberry Pi 4
2. 5V 3A out put , 100-240V 0.3A 50/60Hz input
3. EU , US , UK , AU plug available ( please write it in order page)
4. There is ON/OFF button one the cable , press to be ON , press again to be OFF , very convenient to control power.
5. Power cable is about 95 cm

Heat Sinks:

1. Aluminum material , with good thermal conductivity.
2. With self-stick thermal conductive adhesive on the back side , easy to install on Raspberry Pi
3. 4 piece heat sink in total , for CPU , RAM , Networking card and USB control module on PCB.

SD Card :

1. 32GB or 64GB capacity to choose
2. Class 10 fast speed ,
3. Provide USB 2.0 USB reader.
4. We don’t pre install system in the SD card , you can install by yourself refer to :
//projects.raspberrypi.org/en/projects/raspberry-pi-setting-up/3

HDMI Cable :

1. Micro HDMI to HDMI
2. Male to male
3. 1.5m approx length
4. Use to connect the Raspberry Pi to LCD/TV/Monitor

Package list :

Bundle 1 :

1 x Raspberry Pi 4 Model B (2GB RAM)
1 x Acrylic Case
1 x Cooling Fan
1 x 32GB SD Card
1 x SD card Reader
4 x Heatsinks
1 x Micro HDMI Cable
1 x 5V 3A Switch Power Adapter
( as following picture )

Bundle 2 :

1 x Raspberry Pi 4 Model B (4GB RAM)
1 x Acrylic Case
1 x Cooling Fan
1 x 32GB SD Card
1 x SD card Reader
4 x Heatsinks
1 x Micro HDMI Cable
1 x 5V 3A Switch Power Adapter
( as following picture )

Bundle 3 :

1 x Raspberry Pi 4 Model B (1GB RAM)
1 x Acrylic Case
1 x Cooling Fan
1 x 32GB SD Card
1 x SD card Reader
4 x Heatsinks
1 x Micro HDMI Cable
1 x 5V 3A Switch Power Adapter
( as following picture )

Bundle 4 :

1 x Raspberry Pi 4 Model B (2GB RAM)
1 x Acrylic Case
1 x Cooling Fan
1 x 64GB SD Card
1 x SD card Reader
4 x Heatsinks
1 x Micro HDMI Cable
1 x 5V 3A Switch Power Adapter
( as following picture )

Bundle 5 :

1 x Raspberry Pi 4 Model B (4GB RAM)
1 x Acrylic Case
1 x Cooling Fan
1 x 64GB SD Card
1 x SD card Reader
4 x Heatsinks
1 x Micro HDMI Cable
1 x 5V 3A Switch Power Adapter
( as following picture )

Bundle 6 :

1 x Raspberry Pi 4 Model B (1GB RAM)
1 x Acrylic Case
1 x Cooling Fan
1 x 64GB SD Card
1 x SD card Reader
4 x Heatsinks
1 x Micro HDMI Cable
1 x 5V 3A Switch Power Adapter
( as following picture )

Raspberry Pi 4 Specifications :

Processor:
Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz

Memory:
1GB, 2GB or 4GB LPDDR4 (depending on model)

Connectivity:
2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN,
Bluetooth 5.0,
BLE Gigabit Ethernet
2 × USB 3.0 ports
2 × USB 2.0 ports.

GPIO:
Standard 40-pin GPIO header
(fully backwards-compatible with previous boards)

Video & sound:
2 × micro HDMI ports (up to 4Kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port

Multimedia:
H.265 (4Kp60 decode);
H.264 (1080p60 decode, 1080p30 encode);
OpenGL ES, 3.0 graphics

SD card support:
Micro SD card slot for loading operating system and data storage

Input power:
5V DC via USB-C connector (minimum 3A 1 )
5V DC via GPIO header (minimum 3A 1 )
Power over Ethernet (PoE)–enabled
(requires separate PoE HAT)

Environment:
Operating temperature 0–50ºC

WARNINGS :

• This product should only be connected to an external power supply rated at 5V/3A DC or 5.1V/ 3A DC
minimum 1 . Any external power supply used with the Raspberry Pi 4 Model B shall comply with relevant
regulations and standards applicable in the country of intended use.
• This product should be operated in a well-ventilated environment and, if used inside a case, the case
should not be covered.
• This product should be placed on a stable, flat, non-conductive surface in use and should not be
contacted by conductive items.
• The connection of incompatible devices to the GPIO connection may affect compliance and result in
damage to the unit and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use
and be marked accordingly to ensure that safety and performance requirements are met. These
articles include but are not limited to keyboards, monitors and mice when used in conjunction with
the Raspberry Pi.
• Where peripherals are connected that do not include the cable or connector, the cable or connector
must offer adequate insulation and operation in order that the relevant performance and safety
requirements are met.

Brand Name

Raspberry pi

Demo Board Type

ARM

Interface

TF Card Support

Memory Capacity

4GB

Processor Brand

BROADCOM

Model Number

Raspberry Pi 4 Model B

ROM Capacity

None

CPU Model

Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz

RAM

1GB/2GB/4GB LPDDR4-2400 SDRAM

WiFi

2.4 GHz and 5.0 GHz IEEE 802.11ac wireless

Bluetooth

Bluetooth 5.0, BLE

USB

2 USB 3.0 ports; 2 USB 2.0 ports.

A/V

4-pole stereo audio and composite video port

Case

Acrylic Case with fan

Power Adapter

5V 3A , USB C port , ON/OFF Switch , EU/US/UK/AU plug

SD Card

32GB,64GB (optional)

15 reviews for Original Raspberry Pi 4 Model B 1/2/4GB RAM Kit

  1. R***v

    1. Упаковано качественно, все в пупырках. 2. Флешка качественная, средняя скорость записи 14мб/сек. Записалось все без проблем. 3. 4 радиатора найс. Не клейте на радиомодуль (серибристый рядом с процом) он и так не греется, а качество связи ухудшится. 4. Корпус хорош. Но защелки ломаются на изи. Сломалась в первый же день от простых манипуляций. Кому не жалко денег берите корпус Argon One. 5. Греется малинка нормально. В режиме простоя 55-60°С. С кулером 35-40°С 6. Кулер мелкий, но ночью его прекрасно слышно. Заснуть не даст.

  2. C***n

    They send me a defect micro Sd card. I have send a message But didnt have a reply yet.. I have bought a micro SD card at a local shop and raspberry is working good.

  3. Z***z

    Muy contento don el producto. Lo recomiendo ampliamente.

  4. A***t

    Satisfied

  5. L***o

    Tudo certo conforme anuncio.

  6. M***s

    Até agora não consegui fazer funcionar o slot de cartão.

  7. D***v

    Good

  8. G***s

    fast easy and accurate transaction. everything in good shape

  9. A***L

    22 дня в пути.Комплектация полная.Установил операционку-работает.Температура проца при установке 55 градусов(на радиаторе, без корпуса).Питание 5.07 вольта.Все в порядке,кроме разъема microHDMI.Слишком низко настроены пружинки,не дают войти разъему на кабеле.Надо отогнуть немного вверх.Вполне рабочий аппарат.Я доволен.Thanks!!

  10. E***d

    Perfect!

  11. Customer

    Excellent! All accessories work fine. I confirm the acrylic case has a film protection *very firmly glued* on both sides so you need to remove it to have the case fully transparent. A nail may not suffice so make sure you use some sharp tool on one corner to remove it without damage. Shipping was fast also. A very good bargain, given what’s currently available on the market in the EU.

  12. R***k

    Delivery took a bit longer than expected but this is not stores fault. Product arrived as expected, currently setting it up and seems to be working. Packaging was pretty good and safe. The case is a low quality and needs to be build just like a bed from ikea. But expect of this its everything fine and as described.

  13. Customer

    Доставка быстрая, товар качественный. Не считая корпуса. Защёлки на нём (на прозрачном) отлетели очень легко и просто. Но это не вина продавца, поэтому не снижаю оценку. Исправил термоклеем.

  14. M***v

    Got the order quick and exact as description.

  15. M***o

    TODO BIEN

Add a review

Your email address will not be published. Required fields are marked *